HEAVY DUTY SYNTHETIC LUBRICANT FOR BALL MILLS

Dylon Grade LB-380 is a premium, synthetic lubricant formulated to meet the high loads and speeds experienced with ball mills, and open gears in heavy industrial applications. Dylon LB-380 is safe, non-toxic and cost effective.

Dylon Grade LB-380's unique blend of base stocks provides a high affinity for steel and other metal surfaces, resisting dripping and creeping. The Tri-Plex EP System provides extreme pressure and corrosion protection. The formula is chemically balanced to eliminate hardening, cracking or decreased adhesive tendencies over a broad temperature range up to 350°F. It's viscoelastic behavior provides a superior film thickness forming a matrix that holds the solid lubricants in place, while lowering the coefficient of friction, allowing energy consumption reductions.

DYLON GR-424

Dylon GR-424 is a unique, cost-effective, problem solving grease designed for heavy industrial equipment. This one grease is designed to protect loaded bearings and drives, machine grease points, couplings, and general bearing applications.

Dylon GR-424 has been designed specifically for heavy-duty service where high loads and demanding environments are common. The cohesive structure fortified with synthetic polymers provides the maximum in-service protection; lube cycle time, and protection from water washout. Dylon GR-424 achieved a 0.24 performance rating in ASTM D-1264 water washout testing. This is an outstanding performance

DYLON GRADE GR-500 PREMIUM MULTI-USE GREASE

Dylon GR-500 is a high temperature, chemical resistant, multi-use industrial grease that guards against washout from metalworking fluids, coolants, and water. The superior adhesive and cohesive properties of Dylon GR-500 provide outstanding protection during both high load and high RPM service. Dylon GR-500 performs at temperatures of up to 500°F.

Dylon GR-500 grease is INDUSTRY ENGINEERED™ to provide excellent durability in harsh environments. Dylon's D-707 "EP" extreme pressure and anti-wear chemistry is used in this grease to provide ultimate equipment protection.

Dylon GR-650 is a synthetic grease developed for demanding industrial applications and high temperature protection up to 650°F. When applications are severe or temperatures are "Hot" this proprietary grease technology significantly outperforms universal greases.

The unique, ashless synthetic base stock provides superior thin film lubrication, allowing for maximum protection. Dylon GR-650 maintains a grease structure at temperatures of 650°F to 700°F, providing solid lubricant protection up to 750°F and can be used in all types of industrial bearings.

Ultra Gear© Automotive Gear Lubricants are a family of synthetic grade gear oils that provide superior operating characteristics for heavily loaded industrial gears. Their outstanding anti-wear additives, combined with a superior oxidation and thermal degradation resistant base stock, provide unequaled service in today's rugged heavy industry. Special additives used in the manufacture of the Series makes these lubricants useable all season, imparting a low pour point and high Viscosity Index (VI). The high VI provides increased film strength, which translates to longer gear life. Dylon Ultra Gear Series can improve fuel economy and provide easier shifting in cold or harsh operating conditions.

Ultra Gear© ML Industrial EP Gear Lubricants are a family of ISO Grades [150, 220, 320, 460, 680, 1000] that provide superior operating characteristics for heavily loaded industrial gears and bearings. Their outstanding anti-wear and R and 0 additives, combined with a superior oxidation resistant HI/VI base stock, provide unequaled service in today's rugged heavy industry. These technically advanced, state-of-the-art lubricants exceed all industry requirements for modern gear lubricants.

Ultra Gear© HL (Hybridized Lubricant) Industrial EP Gear Lubricants are a family of ISO Grades [HL150, HL220, HL320, HL460, HL680, HL1000] that provide superior operating characteristics for heavily loaded industrial gears and bearings. Tests have proven that petroleum-based gear oils can demonstrate improved performance by the incorporation of synthetic base stocks. Dylon's exclusive hybrid system combines HI/VI technology with premium synthetic base stocks.

Ultra Gear© SL Industrial EP Gear Lubricants are a family of ISO Grades [150, 220, 320, 460, 680, 1000] that provide superior operating characteristics for heavily loaded industrial gears and bearings. These lubricants are 100% synthetic for maximum oxidation resistance. Ultra Gear SL provides the most constant viscosity and greatest thermal stability available.

Ultra Gear© SL incorporates Dylon's synthetic polymer technology to yield premium top-tier gear lubricants. Their outstanding anti-wear and R and 0 additives, combined with a superior oxidation resistant HI/VI-synthetic hybridized base stock, provide unequaled service in today's rugged heavy industry. These technically advanced, state-of-the-art lubricants exceed all industry requirements for modern gear lubricants. Oxidation is the number one cause of gear wear. Ultra Gear© SL are the most oxidation resistant gear lubricants in their class. This translates to longer gear life.